Checkmate, our customer the winner with Light Duty Casters

Castors – Light Duty up to 120kg

Blickle Light Duty Zinc Pl 125mm Nylon Bolt Hole Castor, Ball Bearing Ctr LKRA-POA, LKRA-POA FI, BKRA-POA. Up to 120kg Capacity.

Black Nylon Casters Light DutyBlack Nylon Casters Light DutyBlack Nylon Casters Light Duty

Blickle Series LKRA-POA, LKRA-POA FI and BKRA-POA Light Duty Black Nylon Castors. Up to 120kg Capacity. Designed and manufactured to high standards in Germany. 

Black Nylon High Impact Wheel Castors feature a strong pressed steel construction with double ball bearing in swivel head, strong central kingpin, ball protection by special top plate and ball disc design. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves. Bolted wheel axle and a zinc plated blue passivated finish. (CR6 free) There is choice of three mounting types Swivel Bolt Hole, Swivel Bolt Hole with StopFix Total Locking Brake and Fixed (rigid) Plate. Easy rolling, right from the start.

COMMON USES; Where larger diameter high impact Nylon (70shore D, Black) castors are required to overcome floor ridging and pitting.

Capacity 120kg.

  • Single 13mm Bolt Hole Mounting.
  • Strong Pressed Steel Construction with Zinc Plated Finish.
  • Wheel is Black Nylon with Centrally Encapsulated Ball Bearing.
  • Wheel Width 25m
  • Overall Height 158mm

 

Blickle Light Duty StnStl Nylon Bolt Hole Castor, Plain Bore LRXA-PO, LRXA-PO-FI, BRXA-PO, 75-120kg Capacity

Light Duty Blickle White Nylon CasterLight Duty Blickle White Nylon CasterLight Duty Blickle White Nylon Caster

Blickle Light Duty Stainless Steel Bolt Hole Castors with Plain Bore LRXA-PO, LRXA-PO-FI and BRXA-PO are designed and manufactured to high standards in Germany.

Nylon Wheel, Pressed high quality chromium nickel stainless steel (Material No.1.4301/AISI 304) castor frame with double ball bearing in the swivel head, strong kingpin, ball protection by special top plate and ball disc design. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves. 

All parts incl the axle material are corrosion-resistant. Bolted wheel axle. There is choice of three mounting types Swivel Bolt Hole, Swivel Bolt Hole with StopFix Total Locking Brake and Fixed (rigid) Plate. Easy rolling, right from the start.

COMMON USES; Where larger diameter high impact Nylon (70shore D, Black) castors are often used to overcome floor ridging and pitting as they are for easier pushing from rest underload.

Capacity 75 to 120kg.
 
Wheel Dia     Wheel Width    Load Cap    Bearing Type    Total    Plate    Bolt Hole    Offset Swivel
  (mm)             (mm)                  (kg)                                       Height   (mm)   Dia mm       Castor (mm)
50                      18                      75                 Plain Bore          69        43         11                  25
75                      23                      75                 Plain Bore          98        43         11                  29
80                     32                      120               Plain Bore         108       57         13                  40
100                   32                      120               Plain Bore         133       57          13                  40
125                   32                      120               Plain Bore          158      57          13                  40
 Wheels are made from high quality impact resistant nylon, 70shore D natural white with plain bore.

Blickle Light Duty Stainless Steel Plate Mount Nylon Castor with Plain Bore. LKPXA-PO, LKPXA-PO-FI, BKPXA-PO. 75 to 120kg

Blickle Light Duty Stainless Steel Nylon Swivel Castor with Plain Bore and StopFix Total Locking Brake.Blickle Light Duty Stainless Steel Nylon Swivel Castor with Plain Bore.Blickle Light Duty Stainless Steel Nylon Rigid Castor with Plain Bore.

Blickle Light Duty Stainless Steel Bolt Hole Castors with Plain Bore LRXA-PO, LRXA-PO-FI and BRXA-PO are designed and manufactured to high standards in Germany.
Nylon Wheel, Pressed high quality chromium nickel stainless steel (Material No.1.4301/AISI 304) plate mount castor frame with double ball bearing in the swivel head, strong kingpin, ball protection by special top plate and ball disc design. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves. 
All parts incl the axle material are corrosion-resistant. Bolted wheel axle. There is choice of three mounting types Swivel Plate, Swivel Plate with StopFix Total Locking Brake and Rigid Plate. Easy rolling, right from the start.
COMMON USES; Where larger diameter high impact Nylon (70shore D, natural white) castors are often used to overcome floor ridging and pitting. They are easier pushing from rest loaded. The wheels are made from high quality impact resistant nylon, 70shore D natural white with plain bore.

Capacity 75 to 120kg.
 
Wheel Dia     Wheel Width    Load Cap    Bearing Type    Total    Plate    Bolt Hole    Offset Swivel
  (mm)             (mm)                  (kg)                                       Height   (mm)   Dia mm       Castor (mm)
50                      18                      75                 Plain Bore          69        43          11                  25
75                      23                      75                 Plain Bore          98        43          11                  29
80                     32                      120               Plain Bore         108       57           13                  40
100                   32                      120               Plain Bore         133       57           13                  40
125                   32                      120               Plain Bore         158       57           13                  40
 Wheels are made from high quality impact resistant nylon, 70shore D natural white with plain bore.

Blickle Light Duty Zinc Pl Bolt Hole ThermoPlastic Elastomer Castor, Ctr Ball Bearing.LKRA-TPA, LKA-TPA-FI & BKRA-TPA Up to 120kg

TPE or ThermoPlastic Elastomer Rubber Castors, Light Duty but certainly a heavy seller and very popular for trolleys always on the go.TPE or ThermoPlastic Elastomer Rubber Castors, Light Duty but certainly a heavy seller and very popular for trolleys always on the go.TPE or ThermoPlastic Elastomer Rubber Castors, Light Duty but certainly a heavy seller and very popular for trolleys always on the go.

Blickle Light Duty Zinc Plated Bolt Hole Castors with Centrally Encapsulated Ball Bearing LKRA-TPA, LKRA-TPA-FI and BKRA-TPA are designed and manufactured to high standards in Germany.

ThermoPlastic Elastomer Wheel in pressed steel zinc plated (blue passivated, Cr6-free) castor frame with centrally encapsulated ball bearing in the swivel head, strong central kingpin, ball protection by special top plate and ball disc design. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves.

The wheel is a ThermoPlastic Elastomer Non-marking Tread (Shore A, grey) on a high quality impact resistant polypropylene centre, fitted with synthetic thread guards and centrally encapsulated ball bearing. Bolted wheel axle. There is choice of three mounting types Swivel Bolt Hole, Swivel Bolt Hole with StopFix Total Locking Brake and Fixed (rigid) Plate. Quiet and smooth  rolling.

COMMON USES; Trolleys, OEM’s, display stands and other shop fitting equipment. 

Capacity 75 to 120kg.
 
Wheel Dia     Wheel Width    Load Cap    Bearing Type    Total    Plate    Bolt Hole    Offset Swivel
  (mm)             (mm)                  (kg)                                       Height   (mm)   Dia mm       Castor (mm)
50                      19                      50                Ball Bearing       69        43         11                  25
75                      25                      75                 Ball Bearing       98        43         11                  29
80                     32                      100               Ball Bearing      108       57         13                  40
100                   32                      110                Ball Bearing      133       57          13                  40
125                   32                      120                Ball Bearing      158       57          13                  40
150                   32                      110                Ball Bearing       182      57           13                  40
 
Wheels are made from high quality impact resistant nylon, 70shore D natural white with plain bore.

Blickle Light Duty Stainless Steel Plate ThermoPlastic Elastomer Castor, Ctr SS Ball Bearing. LKPXA-TPA, LKPXA-TPA-FI, BKPXA-TPA Up to 120kg

Blickle Light Duty Stainless Steel ThermoPlastic Elastomer Rigid Castor with Central Sealed Ball Bearing.Blickle Light Duty Stainless Steel ThermoPlastic Elastomer Rubber Tread Swivel Castor with Central Sealed Ball Bearing and StopFix Total Locking Brake.Blickle Light Duty Stainless Steel ThermoPlastic Elastomer Rubber Tread Swivel Castor with Central Sealed Ball Bearing and StopFix Total Locking Brake.

Light Duty Versatile ThermoPlastic Elastomer Tread Castor make this a prime candidate for trolleys and equipment in Hospitals, Clinics and Aged Care Facilities.

Blickle Light Duty Stainless Steel Plate Castors with Centrally Encapsulated Ball Bearing LKPXA-TPA, LKPXA-TPA-FI and BKPXA-TPA are designed and manufactured to high standards in Germany.

ThermoPlastic Elastomer Wheel in pressed high quality chromium-nickel stainless steel (Material No.1.4301/AISI 304) castor frame with double ball bearing in the swivel head, strong central kingpin, ball protection by special top plate and ball disc design. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves. All parts including the axle material are corrosion resistant. Bolted wheel axle.

The wheel is a ThermoPlastic Elastomer Non-marking Tread (85 Shore A, grey) on a high quality impact resistant polypropylene centre, fitted with synthetic thread guards and centrally encapsulated ball bearing with additional ball bearing seals as standard. There is choice of three mounting types Swivel Plate, Swivel Plate with StopFix Total Locking Brake and Fixed (rigid) Plate. Quiet and smooth  rolling.

COMMON USES; Catering in Restaurants, Clubs, Taverns, Pubs, Hotels and Motels as well as Hospitals, Clinics and Aged Care Facilities where standards are high, health and cleanliness regulations need to be abided and noise has to be kept to a minimum

Capacity 50 to 120kg.
 Wheel Dia     Wheel Width    Load Cap    Bearing Type    Total    Plate Size     Bolt Hole Spacing    Bolt Hole     Offset Swivel
  (mm)             (mm)                  (kg)                                       Height   (mm)             (mm)                          Dia mm        Castor (mm)
50                      19                      50                Ball Bearing       71         60×60            38×38/48×48           6.2                  25
75                      25                      75                 Ball Bearing       100     60×60             38×38/48×48           6.2                  29
80                     32                      100               Ball Bearing      111       90×66             75×45/61×51             8.5                  40
100                   32                      110                Ball Bearing      136      90×66             75×45/61×51             8.5                  40   
125                   32                      120                Ball Bearing      161       90×66             75×45/61×51             8.5                  40
Wheels are made from high quality impact resistant nylon, 70shore D natural white with plain bore.

L Series Light Duty Twin Wheel Zinc Plated Swivel Polypropylene Wheel Castors. Up to 60kg Capacity.

Polyprop CasterPolyprop CasterPolyprop Caster

L Series Castors feature a strong pressed steel construction with a zinc plate finish for plate & bolt hole mounting. Choice of five mounting types are Rigid Plate, Swivel Plate, Swivel Bolt Hole, Wheel Lock Plate, & Wheel Lock Bolt Hole. Light weight and versatile, sure to suit many needs.

COMMON USES; Light furniture, Small tool boxes, Cabinets, Display units, Garment Racks and etc ……..

Capacity 60kg.

  • Plate size 50 x 50mm with hole centres 36 x 36mm or with 10.2mm Bolt Hole Mounting.
  • Strong Pressed Steel Construction with Zinc Plated Finish.
  • Double Ball Racer
  • Wheel Width 20mm x 2 wheels.
  • Overall Height 72mm

L Series Light Duty ThermoPlastic Elastomer Tread Castor with Plain Bore. Up to 40kg Capacity.

Thermoplastic Elastomer CasterThermoplastic Elastomer CasterThermoplastic Elastomer Caster

L Series ThermoPlastic Elastomer on Polypropylene wheel Castors feature a strong pressed steel construction with a zinc plate finish for plate & bolt hole mounting. Choice of five mounting types are Rigid Plate, Swivel Plate, Swivel Bolt Hole, Wheel Lock Plate, & Wheel Lock Bolt Hole. Quietly does it. Rolling seems more gliding. It’s smooth.

COMMON USES; Light furniture, Small tool boxes, Cabinets, Display units, Garment Racks and etc …..

Capacity Up to 40kg.

  • Plate size 50 x 50mm with hole centres 36 x 36mm or with single 10.2mm Bolt Hole Mounting.
  • Strong Pressed Steel Construction with Zinc Plated Finish.
  • Double Ball Racer
  • Wheel Width 19mm
  • Overall Height 72mm

L Series Light Duty Twin Wheel ThermoPlastic Elastomer Tread Swivel Castor with Plain Bore. Up to 70kg Capacity.

Thermoplastic Elastomer CasterThermoplastic Elastomer CasterThermoplastic Elastomer CasterThermoplastic Elastomer Caster

L Series Twin Wheel ThermoPlastic Elastomer on Polypropylene wheel Castors feature a strong pressed steel construction with a zinc plate finish for plate & bolt hole mounting.

Choice of five mounting types are Rigid Plate, Swivel Plate, Swivel Bolt Hole, Wheel Lock Plate, & Wheel Lock Bolt Hole. Quietly does it. Rolling seems more gliding. It’s smooth.

COMMON USES; Light furniture, Small tool boxes, Cabinets, Display units, Garment Racks and etc …..

Capacity 70kg.

  • Plate size 60 x 60mm with hole centres 46 x 46mm (6.5mm bolt holes) or with single 10.2mm Bolt Hole Mounting.
  • Strong Pressed Steel Construction with Zinc Plated Finish.
  • Double Ball Racer
  • Wheel Width 20mm x 2 wheels.
  • Overall Height 72mm

L Series Light Duty White Nylon Castor with Plain Bore. Up to 40kg Capacity.

Solid White Nylon Wheel CastorSolid White Nylon Wheel CastorSolid White Nylon Wheel CastorSolid White Nylon Wheel Castor

50mm Solid Nylon Wheel Castors feature a strong pressed steel construction with a zinc plate finish for plate & bolt hole mounting. Choice of five mounting types are Rigid Plate, Swivel Plate, Swivel Bolt Hole, Wheel Lock Plate, & Wheel Lock Bolt Hole. Do you want easy rolling from the first push?

COMMON USES; Light furniture, Small tool boxes, Cabinets, Display units, Garment Racks and etc …..

Capacity 40kg.

  • Plate size 50 x 50mm with hole centres 36 x 36mm or with single 10.2mm Bolt Hole Mounting.
  • Strong Pressed Steel Construction with Zinc Plated Finish.
  • Double Ball Racer
  • Wheel Width 19mm
  • Overall Height 72mm

K Series Light Duty Zinc Plated ThermoPlastic Elastomer Castor with Precision Bearings. Up to 60kg Capacity.

K Series Light Duty Swivel Plate Zinc Plated ThermoPlastic Elastomer Castor with Precision Bearings and Total Locking BrakeK Series Light Duty Swivel Plate Zinc Plated ThermoPlastic Elastomer Castor with Precision BearingsK Series Light Duty Bolt Hole Zinc Plated ThermoPlastic Elastomer Castor with Precision Bearings and Total Locking BrakeK Series Light Duty Bolt Hole Zinc Plated ThermoPlastic Elastomer Castor with Precision BearingsK Series Light Duty Rigid Zinc Plated ThermoPlastic Elastomer Castor with Precision Bearings

75 and 100mm ThermoPlastic Elastomer Tread on Polypropylene Wheel Castors feature a strong pressed steel construction with a zinc plate finish for plate & bolt hole mounting. Choice of five mounting types are Rigid Plate, Swivel Plate, Swivel Bolt Hole, Wheel Lock Plate, & Wheel Lock Bolt Hole. The TPE or ThermoPlastic Elastomer Wheels in the economical light duty K Series frames are the perfect choice for the common everyday trolley needs where you need to run quiet and protect floors.

COMMON USES; Light furniture, Small tool boxes, Cabinets, Display units, Garment Racks and etc …..
Capacity 50kg for 75mm and 60kg for 100mm castors.


Overall Heights are;

75mm Wheel Plate Mount is 102mm, 100mm Wheel Plate Mount is 127mm

75mm Wheel Bolt Hole Mount is 99mm, 100mm Wheel Bolt Hole Mount is 125mm


  • Plate size 95 x 70mm with hole centres 78/74 x 44.5mm (holes 11x9mm elongated) or with single 10.2mm Bolt Hole Mounting.
  • Strong Pressed Steel Construction with Zinc Plated Finish.
  • Double Ball Racer
  • Wheel Tread Width 25mm
  • Hub Width 30mm
  • Wheels with Precision Bearings and Thread Guards
 

K Series Light Duty Nylon Zinc Plated Caster with Plain Bore. Up to 80kg Capacity

Nylon Caster Light Duty Zinc PlatedNylon Caster Light Duty Zinc PlatedNylon Caster Light Duty Zinc PlatedNylon Caster Light Duty Zinc PlatedNylon Caster Light Duty Zinc Plated

75 and 100mm Solid Nylon Wheel Castors feature a strong pressed steel construction with a zinc plate finish for plate & bolt hole mounting. Choice of five mounting types are Rigid Plate, Swivel Plate, Swivel Bolt Hole, Wheel Lock Plate, & Wheel Lock Bolt Hole. Do you want the tried and tested Light Duty Nylon Wheel Castor for easy rolling, right from the first push?

COMMON USES; Light furniture, Small tool boxes, Cabinets, Display units, Garment Racks and etc …..

Capacity 70kg for 75mm and 80kg for 100mm castors.


Overall Heights are;

75mm Wheel Plate Mount is 102mm, 100mm Wheel Plate Mount is 127mm

75mm Wheel Bolt Hole Mount is 99mm, 100mm Wheel Bolt Hole Mount is 125mm


  • Plate size 95 x 70mm with hole centres 78/74 x 44.5mm (holes 11x9mm elongated) or with single 10.2mm Bolt Hole Mounting.
  • Strong Pressed Steel Construction with Zinc Plated Finish.
  • Double Ball Racer
  • Wheel Tread Width 25mm
  • Hub Width 30m